Hanes Supply, Sling and Rigging Specialists
Complete Contractor & Industrial Supplier Since 1930. Let us be Your Sling and Rigging Specialists
Product Category
Wire Rope
Wire Rope Slings
Rigging Fittings
Chain and Chain Slings
Load Securement
Synthetic Slings
Rope and Cords
Lifting Clamps
Hydraulic Power Systems
Material Handling
Safety Products
Hand Tools
Power Tools and Accessories
Cutting Tools
Janitorial and MRO Supplies
Fasteners and Concrete Anchors
Hose and Accessories
Construction Supplies
Electrical and Electrician Tools
Ridgid Plumbing and Pipe Tools
Clearance Items
Roller Pry Truck
Roller Pry Truck
 Larger Image &/or Dimensional Diagram
Roller Pry Truck Move up to 10,000 pound loads using two 7' roller pry trucks


    Our handles are made from select hardwoods and are tapered from the grip to a massive 7 inch bottom width for greater strength.

    All handles are sanded and varnished for a splinter free surface. End grain is sealed for protection from moisture and rotting.

    Easy movement of heavy loads is assured with large 5" semi-steel wheels. Stability is unmatched with a wheel stance of over 11".

    Large wheel bearing surface improves durability and work life. The bores are machined to roll wobble-free for easy maneuvering.

    Wheels are mounted on large 1 inch axles for smooth running while carrying capacity loads.

    Wheels have extra thick 1/4 inch flanges for strength. Treads are bevel machined to promote smooth running on hard surfaces.

    Wheels are retained by snap rings for durability with no sharp snag points.

    The 1" x 12" axle is welded to a 3/8" thick plate for strength and durability. Nose pieces are 3/8" plated steel with beveled edge.

    Four through-bolts clamp the hardwood handles between the nose piece and axle plate for maximum strength and durability.

    High quality composite plastic wheels are available at no extra cost. Specify plastic wheels in the Comment field on the order page.

You Might Also be Interested In...
Leather Palm Gloves- Clute with Rubberized Safety Cuffs
Omega II Hard Hats
Universal and Oil Spill Kits
item No.DescriptionWeight (lb)
MAT10015Badger Heavy-Duty 5' Roller Pry Truck10000
Price Qty Unit Buy Favorites
$163.02 (EA) EA Add To Cart Add To Favorites

Back To Top
2000 Hanes Supply, Inc. All Rights Reserved Home | Product and Recall Notices | HWM Award | Contact Us | Careers Privacy Policy
Terms of Use
Catalog Request | Store Locations | Quote Request | Shipping
“To the extent applicable, all parties agree that they will abide by the provisions 29 CFR Part 471 Appendix A to Subpart A. Additionally, this contractor and subcontractor shall abide by the requirements of 41 CFR §§ 60-1.4(a), 60-300.5(a), 60-300.10 and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity or national origin. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability.”