Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Screwdrivers & Nutdrivers
-
![Klein® 605-10 Cabinet Screwdriver, Cushion-Grip®, 1/4 in Point, Steel Shank, 14-11/32 in OAL, Acetate Handle, Polished Chrome]()
Klein® 605-10 Cabinet Screwdriver, Cushion-Grip®, 1/4 in Point, Steel Shank, 14-11/32 in OAL, Acetate Handle, Polished Chrome HSI#: THA36660Call for availability$14.80$14.80 -
![Klein® 602-6 Keystone Screwdriver, Heavy Duty, Cushion-Grip®, 5/16 in Point, 6 in Round Steel Shank, 10.938 in OAL, Rubber Handle]()
Klein® 602-6 Keystone Screwdriver, Heavy Duty, Cushion-Grip®, 5/16 in Point, 6 in Round Steel Shank, 10.938 in OAL, Rubber Handle HSI#: THA36420Call for availability$13.67$13.67 -
![Klein® K44 Screw Holding Screwdriver, 5/16 in Slotted Point, Round Steel Shank, 8-1/4 in OAL, Plastic Handle, ANSI/ASME Specified]()
Klein® K44 Screw Holding Screwdriver, 5/16 in Slotted Point, Round Steel Shank, 8-1/4 in OAL, Plastic Handle, ANSI/ASME Specified HSI#: THA37008Call for availability$11.50$11.50 -
![Klein® 32585 4-in-1 Electronic Screwdriver, 4 pc, Cushion Grip Handle, Steel]()
Klein® 32585 4-in-1 Electronic Screwdriver, 4 pc, Cushion Grip Handle, Steel HSI#: THA38635Call for availability$11.97$11.97 -
![Williams® SDS-62 Stubby Electrician's Screwdriver, 1/4 in Slotted, 3-1/2 in OAL, Chrome Plated]()
Williams® SDS-62 Stubby Electrician's Screwdriver, 1/4 in Slotted, 3-1/2 in OAL, Chrome Plated HSI#: THA74253Call for availability$8.51$8.51 -
![Klein® K23 Screw Holding Screwdriver, 3/16 in Slotted Point, Steel Shank, 5-1/4 in OAL, Plastic Handle, Polished Chrome]()
Klein® K23 Screw Holding Screwdriver, 3/16 in Slotted Point, Steel Shank, 5-1/4 in OAL, Plastic Handle, Polished Chrome HSI#: THA36720Call for availability$11.37$11.37 -
![Klein® Cushion-Grip® 630-3/16 Nut Driver, 3/16 in, Hollow/Round Shank, Black/Yellow Cushion Grip Handle, Polished Chrome]()
Klein® Cushion-Grip® 630-3/16 Nut Driver, 3/16 in, Hollow/Round Shank, Black/Yellow Cushion Grip Handle, Polished Chrome HSI#: THA36840Call for availability$11.08$8.33Savings: $2.75 (25%) -
![Klein® Cushion-Grip® 663 Screwdriver, #3 Square Recessed Point, Steel Shank, 8-1/4 in OAL, Acetate Handle, Polished Chrome]()
Klein® Cushion-Grip® 663 Screwdriver, #3 Square Recessed Point, Steel Shank, 8-1/4 in OAL, Acetate Handle, Polished Chrome HSI#: THA37180Call for availability$10.23$10.23 -
![Klein® 32559 Extended Reach Screwdriver, #1, #2, 1/4 in, 3/16 in, 5/16 in Nut Driver/Phillips®/Slotted Point, 9-7/64 in OAL]()
Klein® 32559 Extended Reach Screwdriver, #1, #2, 1/4 in, 3/16 in, 5/16 in Nut Driver/Phillips®/Slotted Point, 9-7/64 in OAL HSI#: THA36387Call for availability$18.14$18.14 -
![Klein® Cushion-Grip® 665 Screwdriver, #1 Square Recessed Point, 11-3/4 in OAL, Polished Chrome, ANSI/ASME Specified]()
Klein® Cushion-Grip® 665 Screwdriver, #1 Square Recessed Point, 11-3/4 in OAL, Polished Chrome, ANSI/ASME Specified HSI#: THA37012Call for availability$11.38$11.38 -
![Klein® 603-1 Stubby Screwdriver, Cushion-Grip®, #2 Phillips® Point, 1-1/2 in Round Steel Shank, 3-7/16 in OAL, Rubber Handle]()
Klein® 603-1 Stubby Screwdriver, Cushion-Grip®, #2 Phillips® Point, 1-1/2 in Round Steel Shank, 3-7/16 in OAL, Rubber Handle HSI#: THA36495Call for availability$9.10$9.10 -
![Klein® S10 Nut Driver, 5/16 in, Hollow Shank, Amber Smooth Grip Handle, ANSI/ASME Specified, Polished Chrome]()
Klein® S10 Nut Driver, 5/16 in, Hollow Shank, Amber Smooth Grip Handle, ANSI/ASME Specified, Polished Chrome HSI#: THA37006Call for availability$9.07$9.07 -
![Klein® PH362 Power Driver Bit, #3 Phillips®Point, 6 in L, Steel]()
Klein® PH362 Power Driver Bit, #3 Phillips®Point, 6 in L, Steel HSI#: TAC42045Call for availability$9.67$9.67 -
![Klein® PH3355 Power Driver Bit, #3 Phillips®Point, 3-1/2 in L, Steel]()
Klein® PH3355 Power Driver Bit, #3 Phillips®Point, 3-1/2 in L, Steel HSI#: TAC42040Call for availability$14.23$14.23 -
![Klein® 635-6 Heavy Duty Magnetic Nut Driver Set, 1/4 to 9/16 in, 6 pc, 9-1/8 to 9-11/16 in OAL, Cushion Grip Handle, Steel]()
Klein® 635-6 Heavy Duty Magnetic Nut Driver Set, 1/4 to 9/16 in, 6 pc, 9-1/8 to 9-11/16 in OAL, Cushion Grip Handle, Steel HSI#: 635-6-11611Call for availability$91.13$91.13 -
![Wright® 9144 Screwdriver, #2 Phillips® Point, Alloy Steel Shank]()
Wright® 9144 Screwdriver, #2 Phillips® Point, Alloy Steel Shank HSI#: 9144-13590Call for availability$12.22$12.22 -
![Klein® BD412 Screwdriver, 3/8 in Keystone Point, Steel Shank, 17-3/16 in OAL, Plastic Handle, Polished Chrome/Black Tipped/Nickel Plated]()
Klein® BD412 Screwdriver, 3/8 in Keystone Point, Steel Shank, 17-3/16 in OAL, Plastic Handle, Polished Chrome/Black Tipped/Nickel Plated HSI#: THA39540Call for availability$20.50$20.50 -
![Klein® 600-4 Keystone Screwdriver, Heavy Duty, Cushion-Grip®, 1/4 in Point, 4 in Steel Square Shank, 8-11/32 in OAL, Non-Magnetic]()
Klein® 600-4 Keystone Screwdriver, Heavy Duty, Cushion-Grip®, 1/4 in Point, 4 in Steel Square Shank, 8-11/32 in OAL, Non-Magnetic HSI#: THA36220Call for availability$11.99$11.99 -
![Crescent® CS5166 Screwdriver, 5/16 in Slotted, Vanadium Steel Shank, Black Oxide Tipped/Chrome Plated Blade]()
Crescent® CS5166 Screwdriver, 5/16 in Slotted, Vanadium Steel Shank, Black Oxide Tipped/Chrome Plated Blade HSI#: THA63751Call for availability$8.67$8.67 -
![Qualtool MSH 7/16 Magnetic Short Power Drive Nut Setter, Steel, 1/4 in Hex]()
Qualtool MSH 7/16 Magnetic Short Power Drive Nut Setter, Steel, 1/4 in Hex HSI#: TAC85400Call for availability$8.38$8.38 -
![Ampco® S-1100 Corrosion Resistant Non-Sparking Screwdriver, #3 Phillips® Point, Alloy Steel Shank, 10-1/8 in OAL, Acetate Handle]()
Ampco® S-1100 Corrosion Resistant Non-Sparking Screwdriver, #3 Phillips® Point, Alloy Steel Shank, 10-1/8 in OAL, Acetate Handle HSI#: S-1100-10129Call for availability$49.57$49.57 -
![Ampco® S-1099 Corrosion Resistant Non-Sparking Screwdriver, #2 Phillips® Point, Alloy Steel Shank, 7-1/2 in OAL, Natural]()
Ampco® S-1099 Corrosion Resistant Non-Sparking Screwdriver, #2 Phillips® Point, Alloy Steel Shank, 7-1/2 in OAL, Natural HSI#: S-1099-10129Call for availability$32.02$32.02 -
![Bondhus® 38476 Nut Driver, 10 mm, Hollow Shank, Red Anti-Roll/Ergonomic/Non-Slip Grip Handle, Polished Chrome]()
Bondhus® 38476 Nut Driver, 10 mm, Hollow Shank, Red Anti-Roll/Ergonomic/Non-Slip Grip Handle, Polished Chrome HSI#: 38476-10265Call for availability$8.75$8.75 -
![Bondhus® 3660 Extra Long Blade, 4 mm Ball End Point, 12 in OAL, ProGuard™, Protanium® High Torque Steel]()
Bondhus® 3660 Extra Long Blade, 4 mm Ball End Point, 12 in OAL, ProGuard™, Protanium® High Torque Steel HSI#: 3660-10265Call for availability$9.01$9.01 -
![Eklind® 91104 Screwdriver, 1/16 in Ball End/Hex Point, 6 in OAL]()
Eklind® 91104 Screwdriver, 1/16 in Ball End/Hex Point, 6 in OAL HSI#: 91104-10722Call for availability$3.05$3.05 -
![Eklind® 92025 PSD™ Precision Screwdriver, 2.5 mm Slotted Point, Black Oxide, ASME Specified, ANSI Specified]()
Eklind® 92025 PSD™ Precision Screwdriver, 2.5 mm Slotted Point, Black Oxide, ASME Specified, ANSI Specified HSI#: 92025-10722Call for availability$3.77$3.77 -
![Eklind® 91106 Screwdriver, 3/32 in Ball End/Hex Point, 6 in OAL]()
Eklind® 91106 Screwdriver, 3/32 in Ball End/Hex Point, 6 in OAL HSI#: 91106-10722Call for availability$3.45$3.45 -
![Eklind® 91108 Screwdriver, 1/8 in Ball End/Hex Point, 7-15/16 in OAL, Acetate Handle, Black Oxide, ASME Specified, ANSI Specified]()
Eklind® 91108 Screwdriver, 1/8 in Ball End/Hex Point, 7-15/16 in OAL, Acetate Handle, Black Oxide, ASME Specified, ANSI Specified HSI#: 91108-10722Call for availability$3.54$3.54 -
![Gearwrench® 311901GR GearDriver™ Socket Shaft, Interchangeable, 1/4 in Shank, 3-1/2 in OAL, Steel, Polished Chrome]()
Gearwrench® 311901GR GearDriver™ Socket Shaft, Interchangeable, 1/4 in Shank, 3-1/2 in OAL, Steel, Polished Chrome HSI#: 311901GR-10143Call for availability$3.99$3.99 -
![Gearwrench® 310901GR GearDriver™ Magnetic Bit Shaft, Interchangeable, 1/4 in Shank, 3-1/2 in OAL, Steel]()
Gearwrench® 310901GR GearDriver™ Magnetic Bit Shaft, Interchangeable, 1/4 in Shank, 3-1/2 in OAL, Steel HSI#: 310901GR-10143Call for availability$6.87$6.87 -
![Greenlee® 0153-02C Screwdriver Set, 7 pc, ASME Specified, Acetate Handle/Steel Shank, Polished Chrome Shank/Black Tipped]()
Greenlee® 0153-02C Screwdriver Set, 7 pc, ASME Specified, Acetate Handle/Steel Shank, Polished Chrome Shank/Black Tipped HSI#: 0153-02C-11113Call for availability$68.71$68.71 -
![Greenlee® 0153-03C Mini Screwdriver Set, 4 pc, ASME Specified, Acetate Handle/SVCM Steel Shank, Black Phosphate]()
Greenlee® 0153-03C Mini Screwdriver Set, 4 pc, ASME Specified, Acetate Handle/SVCM Steel Shank, Black Phosphate HSI#: 0153-03C-11113Call for availability$31.21$31.21 -
![Greenlee® 0153-13C Heavy Duty Screwdriver, 1/4 in Flat/Keystone Point, Steel Shank, 12-11/32 in OAL, Acetate Handle, Black Phosphate Plated]()
Greenlee® 0153-13C Heavy Duty Screwdriver, 1/4 in Flat/Keystone Point, Steel Shank, 12-11/32 in OAL, Acetate Handle, Black Phosphate Plated HSI#: 0153-13C-11113Call for availability$10.19$10.19 -
![Klein® Cushion-Grip® Rapi-Driv® 670-3 Screwdriver, 3/16 in Cabinet Point, Steel Shank, 7-3/4 in OAL, Acetate Handle, Polished Chrome, ANSI/ASME Specified]()
Klein® Cushion-Grip® Rapi-Driv® 670-3 Screwdriver, 3/16 in Cabinet Point, Steel Shank, 7-3/4 in OAL, Acetate Handle, Polished Chrome, ANSI/ASME Specified HSI#: 670-3-11611Call for availability$11.35$11.35 -
![Klein® 32401 Replacement Bit, Imperial, 3/16 in, 1/4 in point, Slotted point, Steel]()
Klein® 32401 Replacement Bit, Imperial, 3/16 in, 1/4 in point, Slotted point, Steel HSI#: 32401-11611Call for availability$5.67$5.67 -
![Klein® 32400 Replacement Bit, Imperial, #1, #2 point, Phillips® point, Steel]()
Klein® 32400 Replacement Bit, Imperial, #1, #2 point, Phillips® point, Steel HSI#: 32400-11611Call for availability$5.67$5.67 -
![Klein® 32715 Adjustable Length Replacement Blade Set, Phillips®/Slotted/Square Point, 4 to 8 in OAL, Steel]()
Klein® 32715 Adjustable Length Replacement Blade Set, Phillips®/Slotted/Square Point, 4 to 8 in OAL, Steel HSI#: 32715-11611Call for availability$20.42$20.42 -
![Klein® 32527 11-in-1 Versatile Screwdriver/Nut Driver, 7 pcs, 3/8 in, 5/16 in, 1/4 in Range, Cushion Grip Handle, Steel]()
Klein® 32527 11-in-1 Versatile Screwdriver/Nut Driver, 7 pcs, 3/8 in, 5/16 in, 1/4 in Range, Cushion Grip Handle, Steel HSI#: 32527-11611Call for availability$20.69$20.69 -
![Klein® 32593 6-in-1 Ratcheting Stubby Screwdriver, 4 pcs, Cushion Grip Handle, Steel]()
Klein® 32593 6-in-1 Ratcheting Stubby Screwdriver, 4 pcs, Cushion Grip Handle, Steel HSI#: 32593-11611Call for availability$18.02$18.02 -
![Klein® 32534 Schrader® 10-Fold Multi-Bit Screwdriver/Nut Driver, 10-in-1 Folding, Imperial, Slotted/Phillips®/Square/Nut Driver Bit, Steel]()
Klein® 32534 Schrader® 10-Fold Multi-Bit Screwdriver/Nut Driver, 10-in-1 Folding, Imperial, Slotted/Phillips®/Square/Nut Driver Bit, Steel HSI#: 32534-11611Call for availability$34.11$34.11
