Milwaukee® 4208-1 Adjustable Position Heavy Duty, 1-1/4 In Chuck, 2 Hp, 4-3/8 In Drill To Center From Base, 250/500 RPM Spindle, 120 Vac

Manufacturer # 4208-1
Generally in stock, call for availability
UPC #:045242012831
Milwaukee® Electromagnetic Drill Press, Adjustable Position Heavy Duty, 1-1/4 In Chuck, #3 Morse Spindle Taper, 11 In Spindle Travel, 250/500 Rpm Spindle Speed, 1 Spindle Speed, 1530/1600 Lb Drill Point Pressure, 4-3/8 In Drill To Center From Base, 25-1/4 In Overall Height, 2 Hp, 120 Vac, 12.5 A
No Job Is Too Large For This Heavy-Duty Drill Press. This Unit Features The 4203 Adjustable-Position, Variable-Speed Base And The 4297-1 1-1/4 In Drill Motor. Built For Production Drilling, This 11.5-Amp Drill Can Handle The Toughest Drilling Jobs With Up To A 1-1/4 In Threaded Hole Capacity. The Two-Speed Motor Runs At 250 And 500 Rpm, Geared Low For Maximum Torque. It Can Produce Up To 1600 Pounds Of Drill Point Pressure With A 1 In Steel Plate. Feedback Speed Control Helps You Maintain Speed During Operation. This Unit Features A No. 3 Morse Taper Chuck, For Fast And Easy Bit Changes While Eliminating Slippage And Breakage. The Dual-Mount Gear Case With Reverse Mount Permits Tight Quarter Drilling.
  • Powerful 11.5 A motor, engineered for the toughest applications
  • Dual mount gear case with reverse mount permits tight quarter drilling
  • 1-1/4 in tap capacity, taps up to 1 in, 14 threaded holes
  • Maximum force, develops up to 1600 lb of drill point pressure with a 1 in steel plate
  • Solid state electronic switching, offers faster, smoother and quieter switching for a longer product lifespan
  • Line lockout, prevents tool from operating if voltage is restored to an interrupted line
  • Forward/reverse electronic feedback speed control, soft start and 6 ft safety chain
  • 9 ft fixed cord
  • Red/grey/black finish
  • Computer controlled reverse
  • Motor magnet lockout prevents de-mag during operation
  • Full wave holding power
  • Metal base
  • Grounded construction
  • 11 in L x 4-1/4 in W base
More Information
Manufacturer Part Number 4208-1
Manufacturer Milwaukee Tool
UPC 045242012831
Length (in) 21
Width (in) 18.75
Height (in) 7
Package Quantity 1/PK
Drill Point Pressure 1530/1600 lb
Drill to Center From Base 4-3/8 in
Spindle Speed 250/500 rpm
Overall Height 25-1/4 in
Voltage Rating 120 VAC
Amperage Rating 12.5 A
Chuck Size 1-1/4 in
Horsepower 2 hp
Spindle Taper #3 Morse
Spindle Travel 11 in
Number of Spindle Speeds 1
Type Adjustable Position Heavy Duty
Write Your Own Review
You're reviewing:Milwaukee® 4208-1 Adjustable Position Heavy Duty, 1-1/4 In Chuck, 2 Hp, 4-3/8 In Drill To Center From Base, 250/500 RPM Spindle, 120 Vac
Warranty (101.33 kB)