Simpson Strong-Tie® Strong-Rod™ Set-Xp22-N Set-Xp® High Strength Epoxy Adhesive With Nozzle And Extension, 22 oz Side-By-Side Cartridge, White/Black/Green, Liquid/Paste, 1.21/1.59

Manufacturer # SET-XP22-N
In stock
$0.00
$53.83
HSI
ANC30270
DESCRIPTION
Simpson Strong-Tie® Strong-Rod™ Epoxy Adhesive, High Strength, Series: Set-Xp®, Side-By-Side Cartridge, 22 Oz, Epoxy Base, Composition: (Resin White Side)-Bisphenol A-Epichlorohydrin, Phenol, Polymer With Formaldehyde, Glycidyl Ether, Butyl Glycidyl Ether, Titanium Dioxide, (Hardener Black Side)- Silica, Crystalline Quartz, Polyamido Amine, 2,4,6-Tris Dimethylaminomethyl) Phenol, Dimethyl Silicone Polymer With Silica, Phenol, Benzene-1,3-Dimethaneamine, 3,6,9-Triazaundecamethylenediamine, Liquid/Paste, 24 Hr At 70 Deg F/72 Hr At 50 Deg F Curing, White/Black/Green, Ammonia/Sweet, 1.21/1.59 Specific Gravity, 250 Deg F/262 Deg F Flash, 6.9/10.3 Ph, 4.23611111111111E-02 Mixing, 3 G/L Voc, Applicable Materials: Grouted Concrete Block, Cracked Concrete And Masonry
Set-Xp® Epoxy Anchoring Adhesive Is A High-Strength Formula For Anchoring And Doweling In Cracked And Uncracked Concrete And Masonry Applications. It Is A Two-Part System With The Resin And Hardener Being Simultaneously Dispensed And Mixed Through The Mixing Nozzle. When Properly Mixed, Adhesive Will Be A Uniform Teal Color For Easy Post-Installation Identification.
Features
  • 1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
  • Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
  • Code listed under the IBCor IRC for cracked and uncracked concrete per ICC-ES ESR-2508
  • Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
  • Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
  • Easy hole cleaning no power-brushing required
  • Suitable for use in dry or water-saturated concrete
  • For best results, store between 45 to 90 deg F
  • Threaded rod anchoring and rebar doweling into concrete and masonry
  • Multiple dot listings
  • Surfaces to receive epoxy must be clean
  • Base material temperature must be 50 deg F or above at the time of installation, for best results, material should be between 70 to 80 deg F at time of application
  • To warm cold material, store cartridges in a warm, uniformly heated area or storage container
  • Do not immerse cartridges in water to facilitate warming
  • Mixed material in nozzle can harden in 30 min at temperatures of 70 deg F and above
  • Use only appropriate Simpson Strong-Tie® mixing nozzle in accordance with Simpson Strong-Tie® instructions
  • Modification or improper use of mixing nozzle may impair epoxy performance
  • The load tables list values based upon results from the most recent testing and may not reflect those in current code reports
  • Passed, non-sag consistency
  • 155 deg F glass transition temperature
PRODUCT SPECIFICATIONS
More Information
Manufacturer Part Number SET-XP22-N
Manufacturer Simpson Strong-Tie
Brand Name SIMPSON STRONG-TIE®
Package Quantity 10/CT
Series SET-XP®
VOC Content 3 g/L
Color White/Black/Green
Mixing Ratio 4.23611111111111E-02
pH Range 6.9/10.3
Flash Point 250/262 deg F
Specific Gravity 1.21/1.59
Odor/Scent Ammonia/Sweet
Applicable Materials Grouted Concrete Block, Cracked Concrete and Masonry
Curing Time 24 hr at 70 deg F/72 hr at 50 deg F
Form Liquid/Paste
Composition (Resin White Side)-Bisphenol A-Epichlorohydrin, Phenol, Polymer With Formaldehyde, Glycidyl Ether, Butyl Glycidyl Ether, Titanium Dioxide, (Hardener Black Side)- Silica, Crystalline Quartz, Polyamido Amine, 2,4,6-Tris Dimethylaminomethyl) Phenol, Dimethyl
Base Type Epoxy
Container Type Side-By-Side Cartridge
Container Size 22 oz
Type High Strength
Write Your Own Review
You're reviewing:Simpson Strong-Tie® Strong-Rod™ Set-Xp22-N Set-Xp® High Strength Epoxy Adhesive With Nozzle And Extension, 22 oz Side-By-Side Cartridge, White/Black/Green, Liquid/Paste, 1.21/1.59
SDS (372.45 kB)