To create the standard flemish eye mechanical splice, rope is separated at each end into two parts – 3 adjacent strands, and 3 adjacent strands and core. These two parts are then re-laid back in opposite directions to form an eye, and ends are secured with a pressed metal sleeve.
Shop All
Two-leg wire rope bridles are ideal in applications in which two lift points are required.
Shop All
All-purpose three-leg wire rope bridles are recommended for handling unbalanced loads.
Shop All
Four-leg wire rope bridles are used for both balanced and unbalanced loads. They are ideal for heavier loads where design calls for more distribution of weight by the use of attachment at four points.
Shop AllTo create the standard flemish eye mechanical splice, rope is separated at each end into two parts – 3 adjacent strands, and 3 adjacent strands and core. These two parts are then re-laid back in opposite directions to form an eye, and ends are secured with a pressed metal sleeve.
Two-leg wire rope bridles are ideal in applications in which two lift points are required.
All-purpose three-leg wire rope bridles are recommended for handling unbalanced loads.
Four-leg wire rope bridles are used for both balanced and unbalanced loads. They are ideal for heavier loads where design calls for more distribution of weight by the use of attachment at four points.
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade

