Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
PHD 550 0150PL Pipe Riser Clamp, 1-1/2 in Pipe, 250 lb, Carbon Steel, Plain
Manufacturer #550 0150PL
Call for availability
$5.22
$5.22
Quantity Break Pricing may apply in the cart
HSI
550 0150PL-12361
PHD 550 0150PL Pipe Riser Clamp, 1-1/2 in Pipe, 250 lb, Carbon Steel, Plain is available to buy in increments of 25
Product Overview
PHD Pipe Riser Clamp, series: FIG 550, 1-1/2 in Pipe, 250 lb, 19 ft-lb, Carbon Steel, Plain, 10 in L, Domestic. Designed for supporting and stabilizing vertical pipe runs, This product is not intended for use with hanger rods. Clamp is designed for standard iron pipe O.D. and must be considered when sizing other types of piping.
Features
- 3/8 x 1-1/4 in bolt
- Low carbon steel
- When possible the clamp should be placed under a coupling, hub or welded lugs on steel pipe
- Bolt torques should be per industry standards
Specifications
| Manufacturer Part Number | 550 0150PL |
|---|---|
| Manufacturer | PHD Manufacturing |
| Brands | PHD |
| Length (in) | 10 |
| Package Quantity | 25/Each |
Reviews
Write Your Own Review