Simpson Strong-Tie® Crack-Pac® ETIPAC10KT Injection Epoxy Kit, 9 oz, Blue, >250°F Flash

SIMPSON STRONG-TIE

Manufacturer #ETIPAC10KT

Call for availability

Be the first to review this product

$295.48

Quantity Break Pricing may apply in the cart

HSI

ANC36011

UPC #:707392151807

Simpson Strong-Tie® Crack-Pac® ETIPAC10KT Injection Epoxy Kit, 9 oz, Blue, >250°F Flash is available to buy in increments of 2

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Overview

Simpson Strong-Tie® Crack-Pac® Injection Epoxy Kit, series: Etipac10, 9 oz, Blue, 7 G/L VOC, >250° F Flash, 24 hr Curing, Bonds To: Concrete, Composition: Bisphenol A-Epichlorohydrin, Benzene-1, 3-Dimethaneamine, Diethylenetriamine, 12 pH. The Crack-Pac® Injection Epoxy is Designed to Repair Cracks in Concrete Ranging From 1/64 in to 1/4 in Wide in Concrete Walls, Floors, Slabs, Columns and Beams. The Mixed Adhesive Has The Viscosity of a Light Oil and a Low Surface Tension, Allowing it to Penetrate Fine to Medium-Width Cracks in Dry, Damp or Wet Conditions with Excellent Results. Resin is Contained in The Cartridge and Hardener is Contained in The Nozzle.

Features

Dispenses with a standard caulking tool, no special dispensing tool needed
Clean and easy to mix
Seals out moisture, protecting rebar in the concrete from corrosion and flooring from moisture damage
Chemically bonds with the concrete to restore strength
Non-shrink material resistant to oils, salts and mild chemicals
Can be used to inject cracks in dry, damp or wet conditions with excellent results
Not for use in actively leaking cracks
In order for components to mix properly, the resin and hardener must be conditioned to 60 - 80° F before mixing
The color of epoxy will change from amber to blue during the cure process and then fade back to light amber within a few weeks of installation
The kit includes everything needed to pressure inject approximately 8 lineal feet of cracks (assumes a concrete of 4 in Thick and 1/16 in W crack)
2010 psi bond strength at 2 days and 3830 psi bond strength at 14 days
5860 psi tensile strength
14% tensile elongation at break
11300 psi compressive yield strength
319000 psi compressive modulus
8020 psi flexural strength
0.08% water absorption
0.002 linear coefficient of shrinkage
16 min gel time
30 min full, mixed cartridge

Specifications

More Information
Manufacturer Part Number	ETIPAC10KT
Manufacturer	Simpson Strong-Tie
Brands	SIMPSON STRONG-TIE
UPC	707392151807
Series	ETIPAC10
Color	Blue
Standard Approvals	ASTM C881 Type I Grade 1 Class C
Flash Point	>250°F
Container Size	9 oz
Package Quantity	1/Each

Reviews

Write Your Own Review