Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Shop MILWAUKEE
-
![Milwaukee® Shockwave™ 48-89-4874 5 pc Impact Drill Tap Set, For Use with Impact Drivers and Drill Drivers, SAE Measurement System]()
Milwaukee® Shockwave™ 48-89-4874 5 pc Impact Drill Tap Set, For Use with Impact Drivers and Drill Drivers, SAE Measurement System HSI#: 48-89-4874-11961Call for availability$39.03$39.03 -
![Milwaukee® 48-00-8501 Torch™ Reciprocating Saw Blade, 6 in L, 7]()
Milwaukee® 48-00-8501 Torch™ Reciprocating Saw Blade, 6 in L, 7 HSI#: 48-00-8501-11961Call for availability$229.97$229.97 -
![Milwaukee® 48-22-2322 9-in-1 General Purpose Ratcheting Multi-Bit Screwdriver, 9 pc, Phillips®/Slotted/Square Point, Ergonomic Handle, Steel]()
Milwaukee® 48-22-2322 9-in-1 General Purpose Ratcheting Multi-Bit Screwdriver, 9 pc, Phillips®/Slotted/Square Point, Ergonomic Handle, Steel HSI#: 48-22-2322-11961Call for availability$21.85$21.85 -
![Milwaukee® 48-20-9110 Shockwave™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 2 in D Cutting, Carbide Cutting Edge, 4 in OAL]()
Milwaukee® 48-20-9110 Shockwave™ Single Ended Hammer Drill Bit, 1/4 in Drill Bit, 1/4 in Hex Shank, 2 in D Cutting, Carbide Cutting Edge, 4 in OAL HSI#: 48-20-9110-11961Call for availability$3.47$3.47 -
![Milwaukee® 42-28-0025 Replacement Rear Guide Roller Kit, For Use with Deep Cut Band Saw]()
Milwaukee® 42-28-0025 Replacement Rear Guide Roller Kit, For Use with Deep Cut Band Saw HSI#: 42-28-0025-11961Call for availability$12.98$12.98 -
![Milwaukee® 49-16-2960 M18 Fuel™ Protective Boot, For Use with M18 Fuel™ 2960/2962/2962P Mid-Torque Impact Wrench]()
Milwaukee® 49-16-2960 M18 Fuel™ Protective Boot, For Use with M18 Fuel™ 2960/2962/2962P Mid-Torque Impact Wrench HSI#: 49-16-2960-11961Call for availability$45.00$45.00 -
![Milwaukee® ShockShield™ 48-22-9034 Pry Bar, Beveled Tip, 12 in OAL, Steel]()
Milwaukee® ShockShield™ 48-22-9034 Pry Bar, Beveled Tip, 12 in OAL, Steel HSI#: 48-22-9034-11961Call for availability$13.97$13.97 -
![Milwaukee® 45-34-9101 Standard Socket with FOUR FLAT™ Sides, 1/2 in, 9/16 in, 6 Points]()
Milwaukee® 45-34-9101 Standard Socket with FOUR FLAT™ Sides, 1/2 in, 9/16 in, 6 Points HSI#: 45-34-9101-11961Call for availability$5.99$5.99 -
![Milwaukee® 48-73-8912 Breathable Unisex Cut-Resistant Gloves, L, Polyurethane, Elastic Knit Cuff, Resists: Abrasion, Cut, Puncture and Tear]()
Milwaukee® 48-73-8912 Breathable Unisex Cut-Resistant Gloves, L, Polyurethane, Elastic Knit Cuff, Resists: Abrasion, Cut, Puncture and Tear HSI#: 48-73-8912-11961Call for availability$4.47$4.47 -
![Milwaukee® 48-01-2016 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 9 in L x 3/4 in W, 5 TPI, Universal Tang]()
Milwaukee® 48-01-2016 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 9 in L x 3/4 in W, 5 TPI, Universal Tang HSI#: 48-01-2016-11961Call for availability$3.84$3.84 -
![Milwaukee® 2990-21HD M18 Fuel™ Abrasive Chop Saw Kit, 14 in dia Blade, 5 in Cutting]()
Milwaukee® 2990-21HD M18 Fuel™ Abrasive Chop Saw Kit, 14 in dia Blade, 5 in Cutting HSI#: 2990-21HD-11961Call for availability$679.00$679.00 -
![Milwaukee® 49-57-8611 1 pc Hole Cutter, 1 in dia, 3/16 in D Cutting, Carbide Cutting Edge]()
Milwaukee® 49-57-8611 1 pc Hole Cutter, 1 in dia, 3/16 in D Cutting, Carbide Cutting Edge HSI#: 49-57-8611-11961Call for availability$43.97$43.97 -
![Milwaukee® 49-57-8615 1 pc Hole Cutter, 1-1/8 in dia, 3/16 in D Cutting, Carbide Cutting Edge]()
Milwaukee® 49-57-8615 1 pc Hole Cutter, 1-1/8 in dia, 3/16 in D Cutting, Carbide Cutting Edge HSI#: 49-57-8615-11961Call for availability$49.97$49.97 -
![Milwaukee® 48-01-2701 The Wrecker™ Sawzall® Demo Profile Reciprocating Saw Blade, 6 in L x 1 in W, 7 TPI, 11 TPI]()
Milwaukee® 48-01-2701 The Wrecker™ Sawzall® Demo Profile Reciprocating Saw Blade, 6 in L x 1 in W, 7 TPI, 11 TPI HSI#: 48-01-2701-11961Call for availability$2.79$2.79 -
![Milwaukee® 49-57-8617 1 pc Hole Cutter, 1-7/32 in dia, 3/16 in D Cutting, Carbide Cutting Edge]()
Milwaukee® 49-57-8617 1 pc Hole Cutter, 1-7/32 in dia, 3/16 in D Cutting, Carbide Cutting Edge HSI#: 49-57-8617-11961Call for availability$51.99$51.99 -
![Milwaukee® 48-01-7706 The Wrecker™ Sawzall® Demo Profile Reciprocating Saw Blade, 9 in L x 1 in W, 8 TPI]()
Milwaukee® 48-01-7706 The Wrecker™ Sawzall® Demo Profile Reciprocating Saw Blade, 9 in L x 1 in W, 8 TPI HSI#: 48-01-7706-11961Call for availability$2.45$2.45 -
![Milwaukee® 204G-21XL M12™ Heated ToughShell™ Jacket with M12™ Battery, Charger and Power Source, Wind/Water Resistant, Gray, XL]()
Milwaukee® 204G-21XL M12™ Heated ToughShell™ Jacket with M12™ Battery, Charger and Power Source, Wind/Water Resistant, Gray, XL HSI#: 204G-21XL-11961Call for availability$218.69$218.69 -
![Milwaukee® 48-01-2702 The Wrecker™ Sawzall® Demo Profile Reciprocating Saw Blade, 9 in L x 1 in W, 7 TPI, 11 TPI]()
Milwaukee® 48-01-2702 The Wrecker™ Sawzall® Demo Profile Reciprocating Saw Blade, 9 in L x 1 in W, 7 TPI, 11 TPI HSI#: 48-01-2702-11961Call for availability$4.37$4.37 -
![Milwaukee® 2126-21XC M12™ Cordless Portable Underbody Light Kit, LED Bulb, Plastic Housing, 1200 Lumens]()
Milwaukee® 2126-21XC M12™ Cordless Portable Underbody Light Kit, LED Bulb, Plastic Housing, 1200 Lumens HSI#: 2126-21XC-11961Call for availability$299.00$299.00 -
![Milwaukee® 49-57-8619 1 pc Hole Cutter, 1-1/4 in dia, 3/16 in D Cutting, Carbide Cutting Edge]()
Milwaukee® 49-57-8619 1 pc Hole Cutter, 1-1/4 in dia, 3/16 in D Cutting, Carbide Cutting Edge HSI#: 49-57-8619-11961Call for availability$54.99$54.99 -
![Milwaukee® 2990-20 M18 Fuel™ Abrasive Chop Saw, 14 in dia Blade, 5 in Cutting]()
Milwaukee® 2990-20 M18 Fuel™ Abrasive Chop Saw, 14 in dia Blade, 5 in Cutting HSI#: 2990-20-11961Call for availability$449.00$449.00 -
![Milwaukee® 48-01-2184 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 6 in L x 3/4 in W, 18 TPI, Universal Tang]()
Milwaukee® 48-01-2184 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 6 in L x 3/4 in W, 18 TPI, Universal Tang HSI#: 48-01-2184-11961Call for availability$2.10$2.10 -
![Milwaukee® 48-01-2703 The Torch™ Sawzall® Demo Profile Reciprocating Saw Blade, 9 in L x 1 in W, 10 TPI, Universal Tang]()
Milwaukee® 48-01-2703 The Torch™ Sawzall® Demo Profile Reciprocating Saw Blade, 9 in L x 1 in W, 10 TPI, Universal Tang HSI#: 48-01-2703-11961Call for availability$4.54$4.54 -
![Milwaukee® 48-01-2168 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 9 in L x 3/4 in W, 18 TPI]()
Milwaukee® 48-01-2168 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 9 in L x 3/4 in W, 18 TPI HSI#: 48-01-2168-11961Call for availability$2.97$2.97 -
![Milwaukee® 48-73-1098 Ratcheting Suspension, 4 Suspension Points, For Use with Milwaukee® Safety Helmet, Plastic, ANSI Specified, OSHA Compliant]()
Milwaukee® 48-73-1098 Ratcheting Suspension, 4 Suspension Points, For Use with Milwaukee® Safety Helmet, Plastic, ANSI Specified, OSHA Compliant HSI#: 48-73-1098-11961Call for availability$19.97$19.97 -
![Milwaukee® 204B-21S M12™ Heated ToughShell™ Jacket with M12™ Battery, Charger and Power Source, Wind/Water Resistant, Black, S]()
Milwaukee® 204B-21S M12™ Heated ToughShell™ Jacket with M12™ Battery, Charger and Power Source, Wind/Water Resistant, Black, S HSI#: 204B-21S-11961Call for availability$218.69$218.69 -
![Milwaukee® 48-01-2093 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 8 in L x 3/4 in W, 8 TPI, 12 TPI, Universal Tang]()
Milwaukee® 48-01-2093 Sawzall® Thin Kerf Profile Reciprocating Saw Blade, 8 in L x 3/4 in W, 8 TPI, 12 TPI, Universal Tang HSI#: 48-01-2093-11961Call for availability$2.79$2.79 -
![Milwaukee® 2808-22 M18 Fuel™ Hole Hawg™ Cordless Right Angle Drill Kit, Quik-Lok™ Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL]()
Milwaukee® 2808-22 M18 Fuel™ Hole Hawg™ Cordless Right Angle Drill Kit, Quik-Lok™ Chuck, 18 V, 1550 rpm No-Load, 15.6 in OAL HSI#: 2808-22-11961Call for availability$1,054.00$644.48Savings: $409.52 (39%) -
![Milwaukee® Hole Dozer™ 49-56-0722 Hole Saw, 2-1/8 in dia, 1.62 in D Cutting, Carbide Cutting Edge]()
Milwaukee® Hole Dozer™ 49-56-0722 Hole Saw, 2-1/8 in dia, 1.62 in D Cutting, Carbide Cutting Edge HSI#: 49-56-0722-11961Call for availability$23.47$23.47 -
![Milwaukee® 48-22-4218 Bolt Cutter, 3/8 in at 42 HRC Cutting, 21 in OAL]()
Milwaukee® 48-22-4218 Bolt Cutter, 3/8 in at 42 HRC Cutting, 21 in OAL HSI#: 48-22-4218-11961Call for availability$190.78$190.78 -
![Milwaukee® ShockShield™ 48-22-9035 Pry Bar, Beveled Tip, 15 in OAL, Steel]()
Milwaukee® ShockShield™ 48-22-9035 Pry Bar, Beveled Tip, 15 in OAL, Steel HSI#: 48-22-9035-11961Call for availability$15.97$15.97 -
![Milwaukee® 48-22-9211 2-in-1 Insulated Ratcheting Box Wrench, 12 Points, 9-5/8 in OAL, Forged Steel]()
Milwaukee® 48-22-9211 2-in-1 Insulated Ratcheting Box Wrench, 12 Points, 9-5/8 in OAL, Forged Steel HSI#: 48-22-9211-11961Call for availability$53.48$53.48 -
![Milwaukee® 49-25-1503 Open-Lok™ 3 pc End Cut Blade Set, For Use with Oscillating Multi-Tool, 1-3/8 in, Carbide]()
Milwaukee® 49-25-1503 Open-Lok™ 3 pc End Cut Blade Set, For Use with Oscillating Multi-Tool, 1-3/8 in, Carbide HSI#: 49-25-1503-11961Call for availability$39.97$39.97 -
![Milwaukee® 2974-22 M18™ Compact Pipeline Inspection System, 3 to 10 in Pipe, Battery, 5 Ah Battery]()
Milwaukee® 2974-22 M18™ Compact Pipeline Inspection System, 3 to 10 in Pipe, Battery, 5 Ah Battery HSI#: 2974-22-11961Call for availability$10,417.22$10,417.22 -
![Milwaukee® 48-20-9009 Shockwave™ Single Ended Hammer Drill Bit, 0.2187 in Drill Bit, 1/4 in Hex Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL]()
Milwaukee® 48-20-9009 Shockwave™ Single Ended Hammer Drill Bit, 0.2187 in Drill Bit, 1/4 in Hex Shank, 4 in D Cutting, Carbide Cutting Edge, 6 in OAL HSI#: 48-20-9009-11961Call for availability$6.97$6.97 -
![Milwaukee® 49-25-1239 Open-Lok™ 10 pc Blade Set, For Use with Oscillating Multi-Tool, 1-3/8 in, High Carbon Steel]()
Milwaukee® 49-25-1239 Open-Lok™ 10 pc Blade Set, For Use with Oscillating Multi-Tool, 1-3/8 in, High Carbon Steel HSI#: 49-25-1239-11961Call for availability$99.97$99.97 -
![Milwaukee® 48-22-8270 Adjustable Heavy Duty Utility Bucket, 14.57 in H x 11.81 in W x 11.81 in D, 2 Pockets, Canvas, Black/Tan]()
Milwaukee® 48-22-8270 Adjustable Heavy Duty Utility Bucket, 14.57 in H x 11.81 in W x 11.81 in D, 2 Pockets, Canvas, Black/Tan HSI#: 48-22-8270-11961Call for availability$80.94$80.94 -
![Milwaukee® 49-16-2854 M18 Fuel™ Protective Boot, For Use with M18 Fuel™ 2854/2855/2855P Compact Impact Wrench]()
Milwaukee® 49-16-2854 M18 Fuel™ Protective Boot, For Use with M18 Fuel™ 2854/2855/2855P Compact Impact Wrench HSI#: 49-16-2854-11961Call for availability$45.00$45.00 -
![Milwaukee® 49-25-1501 Open-Lok™ 1 pc Blade, For Use with Oscillating Multi-Tool, 1-3/8 in Cutting Width, 1-5/8 in Max Plunge Cut Depth, Carbide]()
Milwaukee® 49-25-1501 Open-Lok™ 1 pc Blade, For Use with Oscillating Multi-Tool, 1-3/8 in Cutting Width, 1-5/8 in Max Plunge Cut Depth, Carbide HSI#: 49-25-1501-11961Call for availability$19.97$19.97
