Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Shop QUALTECH
-
![Qualtech DIC08497 DIC Standard File, 8 in L, Bastard Cut]()
Qualtech DIC08497 DIC Standard File, 8 in L, Bastard Cut HSI#: THA96430Call for availability$4.45$4.45 -
![Qualtech DIC08560 American Pattern Mill File, 8 in L, Single Cut]()
Qualtech DIC08560 American Pattern Mill File, 8 in L, Single Cut HSI#: THA96460Call for availability$6.75$6.75 -
![Qualtech DEWCHAT1/4-60 DEWCHAT Chatterless Countersink, 1/4 in dia Shank, 6 Flutes, 60° Included, 1/4 in dia Min Cutting, HSS]()
Qualtech DEWCHAT1/4-60 DEWCHAT Chatterless Countersink, 1/4 in dia Shank, 6 Flutes, 60° Included, 1/4 in dia Min Cutting, HSS HSI#: DEWCHAT1/4-60-10659Call for availability$7.28$7.28 -
![Qualtech DEWCHAT3/4-100 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 100° Included, 3/4 in dia Min Cutting, HSS]()
Qualtech DEWCHAT3/4-100 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 100° Included, 3/4 in dia Min Cutting, HSS HSI#: DEWCHAT3/4-100-10659Call for availability$37.35$37.35 -
![Qualtech DEWMSK1-60 Machine Countersink, 1/2 in dia Shank, 4 Flutes, 60° Included, 1 in dia Min Cutting, HSS]()
Qualtech DEWMSK1-60 Machine Countersink, 1/2 in dia Shank, 4 Flutes, 60° Included, 1 in dia Min Cutting, HSS HSI#: DEWMSK1-60-10659Call for availability$41.02$41.02 -
![Qualtech DEWCHAT3/4-60 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 60° Included, 3/4 in dia Min Cutting, HSS]()
Qualtech DEWCHAT3/4-60 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 60° Included, 3/4 in dia Min Cutting, HSS HSI#: DEWCHAT3/4-60-10659Call for availability$33.54$33.54 -
![Qualtech DEWSFC3/4-82 DEWSFC Countersink, 3/8 in dia Shank, 1 Flutes, 82° Included, 3/4 in dia Min Cutting, HSS]()
Qualtech DEWSFC3/4-82 DEWSFC Countersink, 3/8 in dia Shank, 1 Flutes, 82° Included, 3/4 in dia Min Cutting, HSS HSI#: DEWSFC3/4-82-10659Call for availability$21.61$21.61 -
![Qualtech DEWSFC1-90 Countersink, 1/2 in dia Shank, 1 Flutes, 90° Included, 1 in dia Min Cutting, HSS]()
Qualtech DEWSFC1-90 Countersink, 1/2 in dia Shank, 1 Flutes, 90° Included, 1 in dia Min Cutting, HSS HSI#: DEWSFC1-90-10659Call for availability$40.24$40.24 -
![Qualtech DEWCHAT1-82 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 82° Included, 1 in dia Min Cutting, HSS]()
Qualtech DEWCHAT1-82 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 82° Included, 1 in dia Min Cutting, HSS HSI#: DEWCHAT1-82-10659Call for availability$48.91$48.91 -
![Qualtech DEWCHAT3/4-120 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 120° Included, 3/4 in dia Min Cutting, HSS]()
Qualtech DEWCHAT3/4-120 Chatterless Countersink, 1/2 in dia Shank, 6 Flutes, 120° Included, 3/4 in dia Min Cutting, HSS HSI#: DEWCHAT3/4-120-10659Call for availability$49.30$49.30 -
![Qualtech DEWCSK1-120 Center Reamer Countersink, 1/2 in dia Shank, 3 Flutes, 120° Included, 1 in dia Min Cutting, HSS]()
Qualtech DEWCSK1-120 Center Reamer Countersink, 1/2 in dia Shank, 3 Flutes, 120° Included, 1 in dia Min Cutting, HSS HSI#: DEWCSK1-120-10659Call for availability$36.40$36.40 -
![Qualtech DEWA0806 Drill Chuck Arbor, Jacobs Taper Mount, #6 Mount Taper, R8 Shank]()
Qualtech DEWA0806 Drill Chuck Arbor, Jacobs Taper Mount, #6 Mount Taper, R8 Shank HSI#: DEWA0806-10659Call for availability$42.39$42.39 -
![Qualtech DEWA0102 Drill Chuck Arbor, Jacobs Taper Mount, #2 Mount Taper, Morse Taper Shank, #1 Shank Taper]()
Qualtech DEWA0102 Drill Chuck Arbor, Jacobs Taper Mount, #2 Mount Taper, Morse Taper Shank, #1 Shank Taper HSI#: DEWA0102-10659Call for availability$16.35$16.35 -
![Qualtech DEWS3-5 Morse Taper Sleeve, #3 Inside x #5 Outside]()
Qualtech DEWS3-5 Morse Taper Sleeve, #3 Inside x #5 Outside HSI#: DEWS3-5-10659Call for availability$33.42$33.42 -
![Qualtech DEWS2-5 Morse Taper Sleeve, #2 Inside x #5 Outside]()
Qualtech DEWS2-5 Morse Taper Sleeve, #2 Inside x #5 Outside HSI#: DEWS2-5-10659Call for availability$33.42$33.42 -
![Qualtech DEWS4-5 Morse Taper Sleeve, #4 Inside x #5 Outside]()
Qualtech DEWS4-5 Morse Taper Sleeve, #4 Inside x #5 Outside HSI#: DEWS4-5-10659Call for availability$33.42$33.42 -
![Qualtech DWCA1406-45 Dovetail Cutter, 3/8 in dia Cutter, 3/8 in dia Weldon Shank, 45° Included, 2-1/8 in OAL]()
Qualtech DWCA1406-45 Dovetail Cutter, 3/8 in dia Cutter, 3/8 in dia Weldon Shank, 45° Included, 2-1/8 in OAL HSI#: DWCA1406-45-10659Call for availability$51.31$51.31 -
![Qualtech DWCA1440-60 Dovetail Cutter, 2-1/4 in dia Cutter, 1 in dia Welded-On Shank, 60° Included, 3-3/4 in OAL]()
Qualtech DWCA1440-60 Dovetail Cutter, 2-1/4 in dia Cutter, 1 in dia Welded-On Shank, 60° Included, 3-3/4 in OAL HSI#: DWCA1440-60-10659Call for availability$232.98$232.98 -
![Qualtech DWCA1420-60 Dovetail Cutter, 1-3/8 in dia Cutter, 5/8 in dia Weldon Shank, 60° Included, 2-7/8 in OAL]()
Qualtech DWCA1420-60 Dovetail Cutter, 1-3/8 in dia Cutter, 5/8 in dia Weldon Shank, 60° Included, 2-7/8 in OAL HSI#: DWCA1420-60-10659Call for availability$100.15$100.15 -
![Qualtech DWCT1162 Center Cutting Single End Ball End Mill, 1-1/4 in dia Cutter, 2-1/2 in Length of Cut, 2 Flutes]()
Qualtech DWCT1162 Center Cutting Single End Ball End Mill, 1-1/4 in dia Cutter, 2-1/2 in Length of Cut, 2 Flutes HSI#: DWCT1162-10659Call for availability$112.54$112.54 -
![Qualtech DWCT1142 Center Cutting Single End Ball End Mill, 7/8 in dia Cutter, 2 in Length of Cut, 2 Flutes, 7/8 in dia Shank, 4-5/16 in OAL, Bright]()
Qualtech DWCT1142 Center Cutting Single End Ball End Mill, 7/8 in dia Cutter, 2 in Length of Cut, 2 Flutes, 7/8 in dia Shank, 4-5/16 in OAL, Bright HSI#: DWCT1142-10659Call for availability$57.62$57.62 -
![Qualtech DWC24MM-4FSE Non-Center Cutting Single End Square End Mill, 24 mm dia Cutter, 2 in Length of Cut, 4 Flutes]()
Qualtech DWC24MM-4FSE Non-Center Cutting Single End Square End Mill, 24 mm dia Cutter, 2 in Length of Cut, 4 Flutes HSI#: DWC24MM-4FSE-10659Call for availability$62.85$62.85 -
![Qualtech DWCF371 Non-Center Cutting Single End Square End Mill, 2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 3/4 in dia Shank, 4-1/2 in OAL, Bright]()
Qualtech DWCF371 Non-Center Cutting Single End Square End Mill, 2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 3/4 in dia Shank, 4-1/2 in OAL, Bright HSI#: DWCF371-10659Call for availability$115.13$115.13 -
![Qualtech DWCF360 Non-Center Cutting Single End Square End Mill, 1-1/2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 1 in dia Shank]()
Qualtech DWCF360 Non-Center Cutting Single End Square End Mill, 1-1/2 in dia Cutter, 2 in Length of Cut, 4 Flutes, 1 in dia Shank HSI#: DWCF360-10659Call for availability$68.20$68.20 -
![Qualtech DWCXL332 Non-Center Cutting Single End Square End Mill, 3/4 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in dia]()
Qualtech DWCXL332 Non-Center Cutting Single End Square End Mill, 3/4 in dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 5/8 in dia HSI#: DWCXL332-10659Call for availability$57.35$57.35 -
![Qualtech DWCF346A Non-Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 4 Flutes, Bright]()
Qualtech DWCF346A Non-Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 4 Flutes, Bright HSI#: DWCF346A-10659Call for availability$53.82$53.82 -
![Qualtech DWCXL208 Non-Center Cutting Double End Square End Mill, 1/4 in dia Cutter, 5/8 in Length of Cut, 4 Flutes]()
Qualtech DWCXL208 Non-Center Cutting Double End Square End Mill, 1/4 in dia Cutter, 5/8 in Length of Cut, 4 Flutes HSI#: DWCXL208-10659Call for availability$22.78$22.78 -
![Qualtech DWCF315 Non-Center Cutting Single End Square End Mill, 15/32 in dia Cutter, 1 in Length of Cut, 4 Flutes, Bright]()
Qualtech DWCF315 Non-Center Cutting Single End Square End Mill, 15/32 in dia Cutter, 1 in Length of Cut, 4 Flutes, Bright HSI#: DWCF315-10659Call for availability$10.07$10.07 -
![Qualtech DWCT346A Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 2 Flutes, 3/4 in dia Shank]()
Qualtech DWCT346A Center Cutting Single End Square End Mill, 1-1/16 in dia Cutter, 2 in Length of Cut, 2 Flutes, 3/4 in dia Shank HSI#: DWCT346A-10659Call for availability$53.00$53.00 -
![Qualtech DWCWC304 Keyseat/Woodruff Cutter, 1/2 in dia Cutter, 3/32 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC304 Keyseat/Woodruff Cutter, 1/2 in dia Cutter, 3/32 in W Cutting, 1/2 in dia Shank HSI#: DWCWC304-10659Call for availability$35.76$35.76 -
![Qualtech DWCWC608 Keyseat/Woodruff Cutter, 1 in dia Cutter, 3/16 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC608 Keyseat/Woodruff Cutter, 1 in dia Cutter, 3/16 in W Cutting, 1/2 in dia Shank HSI#: DWCWC608-10659Call for availability$44.86$44.86 -
![Qualtech DWCWC202 Keyseat/Woodruff Cutter, 1/4 in dia Cutter, 1/16 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC202 Keyseat/Woodruff Cutter, 1/4 in dia Cutter, 1/16 in W Cutting, 1/2 in dia Shank HSI#: DWCWC202-10659Call for availability$35.76$35.76 -
![Qualtech DWCWC405 Keyseat/Woodruff Cutter, 5/8 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC405 Keyseat/Woodruff Cutter, 5/8 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank HSI#: DWCWC405-10659Call for availability$50.43$50.43 -
![Qualtech DWCWC406 Keyseat/Woodruff Cutter, 3/4 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank]()
Qualtech DWCWC406 Keyseat/Woodruff Cutter, 3/4 in dia Cutter, 1/8 in W Cutting, 1/2 in dia Shank HSI#: DWCWC406-10659Call for availability$35.76$35.76 -
![Qualtech DWRR1INCH Chucking Reamer, 1 in dia x 10-1/2 in OAL, Round Shank, Straight Flute]()
Qualtech DWRR1INCH Chucking Reamer, 1 in dia x 10-1/2 in OAL, Round Shank, Straight Flute HSI#: DWRR1INCH-10659Call for availability$65.22$65.22 -
![Qualtech DWRR27/64 Chucking Reamer, 27/64 in dia x 7 in OAL, Round Shank, Straight Flute]()
Qualtech DWRR27/64 Chucking Reamer, 27/64 in dia x 7 in OAL, Round Shank, Straight Flute HSI#: DWRR27/64-10659Call for availability$18.60$18.60 -
![Qualtech DWRRTS21/32 Chucking Reamer, 21/32 in dia x 9 in OAL, #2 dia Morse Taper Shank, Straight Flute]()
Qualtech DWRRTS21/32 Chucking Reamer, 21/32 in dia x 9 in OAL, #2 dia Morse Taper Shank, Straight Flute HSI#: DWRRTS21/32-10659Call for availability$35.88$35.88 -
![Qualtech DWRRTS1INCH Chucking Reamer, 1 in dia x 10-1/2 in OAL, #3 dia Morse Taper Shank, Straight Flute]()
Qualtech DWRRTS1INCH Chucking Reamer, 1 in dia x 10-1/2 in OAL, #3 dia Morse Taper Shank, Straight Flute HSI#: DWRRTS1INCH-10659Call for availability$87.64$87.64 -
![Qualtech DWRRDP.3120 Dowel Pin Reamer, 0.312 in dia x 6 in OAL, Round Shank, Straight Flute]()
Qualtech DWRRDP.3120 Dowel Pin Reamer, 0.312 in dia x 6 in OAL, Round Shank, Straight Flute HSI#: DWRRDP.3120-10659Call for availability$14.94$14.94 -
![Qualtech DWRR1-1/16 Chucking Reamer, 1-1/16 in dia x 10-1/2 in OAL, Round Shank, Straight Flute]()
Qualtech DWRR1-1/16 Chucking Reamer, 1-1/16 in dia x 10-1/2 in OAL, Round Shank, Straight Flute HSI#: DWRR1-1/16-10659Call for availability$66.98$66.98
