Southwire® Surge Guard® 14880023-6 1-ph Type SJTW-A Heavy Duty Right Angle GFCI Plug Tri Cord, 120 VAC, 15 A, 12 AWG Conductor
Manufacturer #14880023-6
In stock
$34.51
$34.51
Quantity Break Pricing may apply in the cart
HSI
ELE25045
UPC #:024098902718
Southwire® Surge Guard® 14880023-6 1-ph Type SJTW-A Heavy Duty Right Angle GFCI Plug Tri Cord, 120 VAC, 15 A, 12 AWG Conductor is available to buy in increments of 1
Product Overview
Southwire® Surge Guard® GFCI Plug Tri Cord, 1-ph Type SJTW-A Heavy Duty Right Angle, 120 VAC, 15 A, 50/60 Hz, 12 AWG Conductor, 3 Outlets, 3 Conductors, -35 to 66°C Operating, NEMA 5-15R Receptacle, NEMA 5-15P Plug, Polymer, Yellow, 2 ft L x 4-3/4 in W.
Features
- Heavy duty molded T-head with three receptacles
- The GFCI is an integral part of male plug
- Provides protection for the extra heavy duty cord and three attached tools
- 12 ga cord is ideal for outdoor rugged construction type environments
- To prevent unmonitored equipment startup, manual reset is required after GFCI trip and power outage
- Provides compliance with national electric code (NEC 2008) article 590.6 for temporary installations
- 4 to 6 ma trip level
- 4 Ohm typical grounded neutral
- Less than 25 ms trip response time for ground fault and grounded neutral trip
- 3 kV ringwave test and 4 kV/2 kA surge immunity test voltage surge withstand
- Operates within normal limits with 0.5 volts injected on power line 150 kHz to 230 MHz radio frequency noise susceptibility
- 3000 operations minimum endurance
- Six times rated overload current
- 5% maximum trip level variation effect of 10 A turn DC shock on ground fault trip
- 1500V RMS - 1 min insulation voltage
- Mechanical indicator
- Manual reset
- Heavy impact-resistant polymer material
Specifications
| Manufacturer Part Number | 14880023-6 |
|---|---|
| Manufacturer | Southwire Company |
| Brands | SOUTHWIRE |
| UPC | 024098902718 |
| Length (in) | 24 |
| Width (in) | 4.75 |
| Height (in) | 14 |
| Standard Approvals |
|
| Type | Type SJTW-A Heavy Duty Right Angle |
| Voltage | 120V AC |
| Material | Polymer |
| Temperature Rating | -35 to 66°C |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade