Master® MH-150NGT-GFA-A Gas Forced Air Torpedo Heater, 150000 Btu/hr, 120 VAC, Natural Gas
Manufacturer #MH-150NGT-GFA-A
In stock
$717.54
$717.54
Quantity Break Pricing may apply in the cart
HSI
MH-150NGT-GFA-A-12785
UPC #:657888141532
Master® MH-150NGT-GFA-A Gas Forced Air Torpedo Heater, 150000 Btu/hr, 120 VAC, Natural Gas is available to buy in increments of 1
Product Overview
Master® Gas Forced Air Torpedo Heater, 150000 Btu Capacity, 120 VAC, 0.8 A, 60 Hz Frequency, 1/9 hp Power, 435 cfm, Natural Gas, Steel, Yellow, 26 in L x 9 in W x 15 in H Dimensions, Import Domestic/Import.We know you need your equipment to work as hard as you do. Trust the Master® natural gas forced air torpedo heater to get the job done. It will warm up to 3800 sq-ft of your shop, barn, construction site, or wherever you need powerful, dependable heat. This high output heater's time-tested design includes the built-in convenience and advanced safety features you expect from Master® products. Master® built for power.
Features
- Continuous electronic ignition
- Adjustable heat angle
- Convenient carry handle
- Heats up to 3800 sq-ft
- Fully enclosed base
- Safety overheat shut off
- Powerful steel construction
- Variable heat settings
- Built-in thermostat
Specifications
| Manufacturer Part Number | MH-150NGT-GFA-A |
|---|---|
| Manufacturer | Pinnacle Climate Technologies |
| Brands | MASTER |
| UPC | 657888141532 |
| Length (in) | 26 |
| Width (in) | 9 |
| Height (in) | 15 |
| Standard Approvals |
|
| Includes | 10 ft Hose and Regulator |
| Warranty | 1 year |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade