Master® MH-60V-GFA-A Gas Forced Air Torpedo Heater, 60000 Btu/hr Capacity, 120 VAC
Manufacturer #MH-60V-GFA-A
In stock
$264.00
$264.00
Quantity Break Pricing may apply in the cart
HSI
EQC24040
UPC #:657888110620
Master® MH-60V-GFA-A Gas Forced Air Torpedo Heater, 60000 Btu/hr Capacity, 120 VAC is available to buy in increments of 1
Product Overview
Master® Gas Forced Air Torpedo Heater, 60000 Btu, 120 VAC, 0.6 A, 60 Hz, 1/10 hp, 300 cfm, Liquid Propane, Steel, Yellow, 18.9 in L x 7.5 in W x 13 in H, Import.We know you need your equipment to work as hard as you do. Trust Master's propane forced air torpedo heater to get the job done. It will warm up to 1500 sq-ft of your shop, barn, construction site, or wherever you need powerful, dependable heat. This high-output heater's time-tested design includes the built-in convenience and advanced safety features you expect from Master® products. Master® built for power.
Features
- Continuous electronic ignition
- Adjustable heat angle
- Convenient carry handle
- Heats up to 1500 sq-ft
- Fully enclosed base
- Safety overheat shut off
- Powerful steel construction
- Variable heat settings
- Built-in thermostat
Specifications
| Manufacturer Part Number | MH-60V-GFA-A |
|---|---|
| Manufacturer | Pinnacle Climate Technologies |
| Brands | MASTER |
| UPC | 657888110620 |
| Length (in) | 18.6 |
| Width (in) | 7.5 |
| Height (in) | 13 |
| Standard Approvals |
|
| Includes | 10 ft Hose and Regulator |
| Warranty | 1 year |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade