TPI G1GUH05003 UH Series 1-Phase Fan Forced Horizontal Standard Unit Heater, 17100 Btu/hr Capacity, 277 VAC, 5 kW Power Rating
Manufacturer #G1GUH05003
Call for availability
$1,330.00
$1,330.00
Quantity Break Pricing may apply in the cart
HSI
G1GUH05003-13251
UPC #:686334644730
TPI G1GUH05003 UH Series 1-Phase Fan Forced Horizontal Standard Unit Heater, 17100 Btu/hr Capacity, 277 VAC, 5 kW Power Rating is available to buy in increments of 1
Product Overview
TPI Unit Heater, 1-Phase Fan Forced Horizontal Standard, Series: UH Series, 17100 Btu/hr, 277 VAC, 18.1 A, 5 kW, 400 cfm, Panel Mount, 9 ft Mounting Height, Steel, Beige, Powder Coated, 20 in W x 11 in D x 13 in H
Features
- Heavy gauge welded steel cabinet with powder coated finish and control compartment with a hinged and latched access door, simplifying wiring installation and maintenance
- Circular copper clad steel sheath element with continuously brazed steel fins formed to match the air delivery pattern of the fan blade
- All units come equipped with automatic reset type limit controls to de-energize the heater should an over temperature situation occur
- Totally enclosed, 1-phase, permanently lubricated, thermally protected motors with unit bearings on 3 to 10 kW models and sleeve bearings on 12.5 to 48 kW models - mounted with rubber insulators to minimize vibration and noise
- Fan assembly enclosed by a heavy gauge, close spaced, chrome plated wire guard
- Louvers are individually adjustable for directional control of air flow and the entire assembly can be repositioned in the field from down flow to up flow or left/right directional air flow
- 20 to 48 kW units and all 480 V have built-in 24 V transformer for low voltage remote thermostat application
Specifications
| Manufacturer Part Number | G1GUH05003 |
|---|---|
| Manufacturer | TPI Corporation |
| Brands | TPI |
| UPC | 686334644730 |
| Length (in) | 21 |
| Width (in) | 17 |
| Height (in) | 22 |
| Standard Approvals |
|
| Warranty | 1 year limited |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrowâ„¢ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade