TPI H1H5507T 5500 1-Phase Standard Washdown Fan Forced Unit Heater, 25600 Btu/hr, 240 VAC, 31.3 A, 7.5 kW
Manufacturer #H1H5507T
Call for availability
$8,411.00
$8,411.00
Quantity Break Pricing may apply in the cart
HSI
H1H5507T-13251
UPC #:686334713207
TPI H1H5507T 5500 1-Phase Standard Washdown Fan Forced Unit Heater, 25600 Btu/hr, 240 VAC, 31.3 A, 7.5 kW is available to buy in increments of 1
Product Overview
TPI Washdown Fan Forced Unit Heater, 1-Phase Standard, Series: 5500, 25600 Btu/hr, 240 VAC, 31.3 A, 60 Hz, 7.5 kW, 400 cfm, 12 in Width, 18 in D, 19-3/4 in Height, Panel Mount, 304 Stainless Steel, Epoxy Powder Coated, Domestic. The Washdown Series unit heaters are electric unit heaters constructed for use in areas that require washing or hosing of equipment due to dirty or dusty industrial environments in non-hazardous locations. The totally enclosed water-tight construction made with corrosion-resistant material make this series ideal for industrial heating applications. The Washdown Series is constructed with all built-in controls and safety temperature controls wired in a non-metallic NEMA 4X control panel with single-point power connections.
Features
- Stainless steel finned tubular element, constructed of 304 or 316 stainless rod and fins
- Control panel on bottom of unit for ease of installation and service
- Disconnect switch with enclosure door interlock
- Front grill rotates to direct airflow
- Single-point power connection
- Fan blade epoxy coated aluminum
- Corrosion resistant in high humidity and water-saturated areas
- 40 to 110° F thermostat temperature rating
- Heavy duty 16 ga 304-stainless steel shroud
- NEMA 4X non-metallic control panel
- 24 V transformer and control panel
- 3-Position off-heat-fan switch
- Capillary thermostat with stainless steel sensor
- Automatic reset thermal cutout
- Totally enclosed UL listed motor
- Pilot light, power on indicator
- 24 V control voltage
- 60° F temperature rise
- 20 ft air throw
- Water-tight and dust-tight
Specifications
| Manufacturer Part Number | H1H5507T |
|---|---|
| Manufacturer | TPI Corporation |
| Brands | TPI |
| UPC | 686334713207 |
| Length (in) | 23 |
| Width (in) | 17 |
| Height (in) | 23 |
| Standard Approvals |
|
| Warranty | 1 year limited |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrowâ„¢ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade