PHD 250 1050EG C-Clamp with Lock Nut, 1/2 in Rod, 500 lb Load, Carbon Steel, Electro-Galvanized
Manufacturer #250 1050EG
In stock
$3.06
$3.06
Quantity Break Pricing may apply in the cart
HSI
250 1050EG-12361
PHD 250 1050EG C-Clamp with Lock Nut, 1/2 in Rod, 500 lb Load, Carbon Steel, Electro-Galvanized is available to buy in increments of 1
Product Overview
PHD C-Clamp, FIG 250 Series, 1/2 in Rod, 500 lb, For Use With: 4 in Pipe, Carbon Steel, Electro-Galvanized. Designed For Attaching Hanger Rod to The Bottom Flange of a Beam. The Hanger Rod Should Make Contact with The Beam Flange to Ensure Full Engagement.
Features
- Low carbon steel with hardened steel cup point set screw
- When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added
- Underwriters laboratories listed in the US (UL)
- Caution should be taken not to over tighten the set screw
- 3/8 to 7/8 in set screws
- 125 in-lb torque set screw
Specifications
| Manufacturer Part Number | 250 1050EG |
|---|---|
| Manufacturer | PHD Manufacturing |
| Brands | PHD |
| Suitable For Use With | 4 in Pipe |
| Load Capacity | 500 lb |
| Material | Carbon Steel |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review