CM® M849AP Anchor Shackle, Bolt, Nut & Cotter, 2.6 ton WLL, 7/16 in, 1/2 in Pin dia
Manufacturer #M849AP
Call for availability
$43.94
$43.94
Quantity Break Pricing may apply in the cart
HSI
FIT30397
CM® M849AP Anchor Shackle, Bolt, Nut & Cotter, 2.6 ton WLL, 7/16 in, 1/2 in Pin dia is available to buy in increments of 1
Product Overview
CM® anchor shackle, bolt, nut and cotter, 2.6 ton working load limit, has a 5:1 design factor and a strength rating approximately 50% higher than a comparable-sized carbon shackle and about 25% stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections.
Features
- Made in the USA from domestic Special Bar Quality (SBQ) steel having fine grainuced sulfur and phosphorus
- Working load limit and traceability codes shown as permanent markings on body
- All shackle have alloy quenched and tempered pins
- 5:1 Design Factor
- Shackles show major deformation before failure
- Special testing and certification available if requested at the time of the order
Specifications
| Manufacturer Part Number | M849AP |
|---|---|
| Manufacturer | Columbus McKinnon Corporation |
| Brands | CM |
| Working Load Limit (ton) | 2.6 |
| Shackle Size | 7/16 in |
| Design Factor | 5:1 |
| Standard Approvals |
|
| Eye Outer Size (in) | 1.15 |
| Pin Diameter | 1/2 in |
| Opening Size | 0.72 in |
| Inner Length | 1.69 in |
| Inner Width | 1.19 in |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review