CM® M851AP Anchor Shackle, Bolt, Nut & Cotter, 5 ton WLL, 5/8 in, 3/4 in Pin dia
Manufacturer #M851AP
In stock
$88.37
$88.37
Quantity Break Pricing may apply in the cart
HSI
FIT30410
UPC #:043927405565
CM® M851AP Anchor Shackle, Bolt, Nut & Cotter, 5 ton WLL, 5/8 in, 3/4 in Pin dia is available to buy in increments of 1
Product Overview
CM® anchor shackle, bolt, nut and cotter, 5 ton working load limit, has a 5:1 design factor and a strength rating approximately 50% higher than a comparable-sized carbon shackle and about 25% stronger than super strong shackles. Anchor shackles can be side loaded or used for multiple connections.
Features
- Made in the USA from domestic Special Bar Quality (SBQ) steel having fine grainuced sulfur and phosphorus
- Working load limit and traceability codes shown as permanent markings on body
- All shackle have alloy quenched and tempered pins
- 5:1 Design Factor
- Shackles show major deformation before failure
- Special testing and certification available if requested at the time of the order
Specifications
| Manufacturer Part Number | M851AP |
|---|---|
| Manufacturer | Columbus McKinnon Corporation |
| Brands | CM |
| UPC | 043927405565 |
| Working Load Limit (ton) | 5 |
| Shackle Size | 5/8 in |
| Design Factor | 5:1 |
| Standard Approvals |
|
| Eye Outer Size (in) | 1/7/2008 |
| Pin Diameter | 3/4 in |
| Opening Size | 1.063 in |
| Inner Length | 2-3/8 in |
| Inner Width | 1-1/2 in |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review