Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D20009ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL, 7-9/32 in Handle Length, Plastic Handle, Black Oxide
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple, 5/16, 3/8, 1/2 in Staple Length
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Chicago Hardware 20040 0 Screw Pin Anchor Shackle, Class 2, 4.75 ton WLL, 3/4 in dia, 7/8 in Pin dia
Manufacturer #20040 0
Call for availability
$38.50
$38.50
Quantity Break Pricing may apply in the cart
HSI
FIT43420
Chicago Hardware 20040 0 Screw Pin Anchor Shackle, Class 2, 4.75 ton WLL, 3/4 in dia, 7/8 in Pin dia is available to buy in increments of 1
Product Overview
Chicago Hardware screw pin anchor shackle, class 2, 4.75 ton working load limit, 3/4 in diameter, 7/8 in pin diameter, screw pin, 3 in inner length, 2 in inner width, 1-1/4 in opening, 1-7/8 in eye outer, drop forged carbon steel body, alloy steel pin.
Features
- Size, working load limit and trademark are permanently marked on all shackles
- All shackles and pins are heat treated
- Loads are based on a design factor of 6:1
- When tested all shackles are pulled at a uniform rate of speed in a direct tension
- +/-1/16 in L tolerance
- +/-1/4 in W tolerance
Specifications
| Manufacturer Part Number | 20040 0 |
|---|---|
| Manufacturer | Chicago Hardware & Fixture |
| Brands | CHICAGO HARDWARE |
| Working Load Limit (ton) | 4.75 |
| Shackle Size | 3/4 in |
| Design Factor | 6:1 |
| Standard Approvals |
|
| Eye Outer Size (in) | 1-7/8 |
| Pin Diameter | 7/8 in |
| Opening Size | 1-1/4 in |
| Inner Length | 3 in |
| Inner Width | 2 in |
| Type | Class 2 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review