Fluke® FLUKE-177 ESFP Digital Multimeter, 1000V DC/VAC, 10 A, 50 MOhm, 1000V AC/DC, 10 A, 100 kHz, 50 Mohm, Digital
Manufacturer #FLUKE-177 ESFP
In stock
$505.52
$505.52
Quantity Break Pricing may apply in the cart
HSI
FLUKE-177 ESFP-12285
UPC #:095969095198
Fluke® FLUKE-177 ESFP Digital Multimeter, 1000V DC/VAC, 10 A, 50 MOhm, 1000V AC/DC, 10 A, 100 kHz, 50 Mohm, Digital is available to buy in increments of 1
Product Overview
Fluke® Digital Multimeter, 1000V DC/VAC, 10 A, 50 MOhm, 1000V AC/DC, 10 A, 100 kHz, 50 MOhm, Safety Rating: EN 61010-1 to CAT IV 600V AC/DC, CAT III 1000V AC/DC, 10000 uF, 2% + 3 (500 Hz to 1 kHz) Accuracy, Digital, 9 VDC Alkaline NEDA 1604/1604A Battery, No, Yes, 7.28 in H x 3.54 in W x 1.7 in D, -10 to 50°C, Hard Plastic. Fluke® 177 digital multi-meter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke® 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems. The Fluke® 177 digital multi-meter gives you True-RMS voltage and current measurements, 6000 count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke® 177 provides higher 0.09 basic accuracy, a digital display with analog bar graph and backlight.
Features
- Manual and automatic ranging
- Display hold and auto-hold
- Frequency and capacitance measurements
- Minimum maximum/average recording
- Closed case calibration through front panel
- Ergonomic case with integrated protective holster
- Digital 6000 count, update 4/s, bar graph 33 segments, update 40/s
- Resistance range - 600 Ohm with accuracy of (0.9% 2), 6 kOhm, 60 kOhm, 600 kOhm, 6 MOhm with accuracy of (0.9% 1), 50 MOhm with accuracy of (1.5% 3)
- Capacitance range 1000 nF, 10 uF, 100 uF with accuracy of (1.2% 2), 9999 uF with accuracy of 10% typical
- Frequency range 99.99, 999.9, 9.999, 99.99 kHz with accuracy of (0.1% 1)
- 200 hr typical alkaline
Specifications
| Manufacturer Part Number | FLUKE-177 ESFP |
|---|---|
| Manufacturer | Fluke® Corporation |
| Brands | FLUKE |
| UPC | 095969095198 |
| Length (in) | 9.69 |
| Width (in) | 6.3 |
| Height (in) | 3.35 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade