Klein® NCVT-6 Non-Contact Voltage Tester Pen with Laser Distance Meter, 12-1,000V AC

KLEIN TOOLS

Manufacturer #NCVT-6

In stock

Be the first to review this product

$57.88

Quantity Break Pricing may apply in the cart

HSI

NCVT-6-11611

UPC #:092644471735

Klein® NCVT-6 Non-Contact Voltage Tester Pen with Laser Distance Meter, 12-1,000V AC is available to buy in increments of 1

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Overview

Non-contact voltage tester with an integrated laser distance meter. It can detect voltage over the full-range from 12 to 1,000V AC and can measure distances from 2 in up to 66 ft. The laser distance meter functions independently from the NCVT with a simple-to-use intuitive interface. Easy, single-button changes between voltage detection and laser distance measurements. Includes:

NCVT
2 x alkaline 1.5V AAA batteries

Features

Non-contact tester determines AC voltage in cables, cords, circuit breakers, switches, outlets, wires, as well as security, entertainment, communications, environmental control, and irrigation systems
Volt pen detects AC voltage from 12 to 1,000V with visual and audible indicators
Incorporates a 66 ft laser distance meter that can measure in meters, inches in fractions or decimals, and feet in fractions or decimals, with accuracy up to 1/16 in
High-visibility reverse contrast display for better viewing in low light conditions
Laser class II, 630 to 670 nm
Simple-to-use intuitive interface; easy single-button changes between laser distance measurements and voltage detection
Delivers simultaneous visual and audible voltage indicators when AC voltage is detected
Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source
Built to withstand a 6.6 ft drop
Auto power-off conserves and extends battery life
Screw-thread battery cap
Lightweight tool with pocket clip for easy everyday carrying and storage
CAT IV 1,000V safety rating
Ingress protection IP40 dust resistant
Under normal operating conditions, at distances from 2 in to 32.8 ft the NCVT-6 has an accuracy of +/- 1/16 in; and at distances greater than 32.8 ft up to 65.6 ft, accuracy of +/- 1/8 in
Frequency: 50 to 500 Hz
Pollution degree: 2
Drop protection: 6.6 ft

Specifications

More Information
Manufacturer Part Number	NCVT-6
Manufacturer	Klein Tools
Brands	KLEIN TOOLS
UPC	092644471735
Length (in)	6.45
Width (in)	1.32
Height (in)	1.21
Standard Approvals	CAT IV 1000V Laser: Class II 630-670 nm Max Power <1mW
Overall Length	6.45 in
Overall Height	1.32 in
Overall Width	1.21 in
Package Quantity	1/Each

Reviews

Write Your Own Review