Milwaukee® 3009-20 M18 Fuel High Performance Dual Battery Backpack Blower
Manufacturer #3009-20
In stock
$499.00
$499.00
Quantity Break Pricing may apply in the cart
HSI
3009-20-11961
UPC #:045242787951
Milwaukee® 3009-20 M18 Fuel High Performance Dual Battery Backpack Blower is available to buy in increments of 1
Product Overview
The M18 Fuel™ dual battery backpack blower is designed for the professional, delivering a higher blowing force than up to 60cc gas. The backpack blower reaches full throttle of 650 CFM and 155 mph in under one second, boosting productivity and control. The blower requires at least (2) M18™ Redlithium™ batteries for operation, while providing (2) additional batteries terminals to extend runtime. This battery set-up allows the operator to adjust the number of batteries for either lighter weight in quicker clean ups or more runtime in extended clearing applications. This adjustable battery configuration combined with a fully adjustable harness, mode select, telescoping nozzle, variable speed trigger, and low noise level of just 62db(a) allow the blower adapt to all the operator's needs when using. The M18 Fuel™ dual battery backpack blower is part of the M18™ system, fully compatible with over 250 solutions.
Specifications
| Manufacturer Part Number | 3009-20 |
|---|---|
| Manufacturer | Milwaukee Tool |
| Brands | MILWAUKEE |
| UPC | 045242787951 |
| Length (in) | 17.13 |
| Width (in) | 25.71 |
| Height (in) | 26.26 |
| Package Quantity | 1/Each |
Reviews
Write Your Own Review
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade