Milwaukee® 3697-22 M18 Fuel™ 2-Tool Combo Kit
    Manufacturer #3697-22
    
            In stock
        
    
            
            $399.00        
    
        
                    $399.00
            
                
        
    
Quantity Break Pricing may apply in the cart
            HSI
        
3697-22-11961
    UPC #:045242637744
        Milwaukee® 3697-22 M18 Fuel™ 2-Tool Combo Kit is available to buy in increments of 1    
Product Overview
                The Milwaukee M18 Fuel™ 2-tool combo kit includes 1/2 in hammer drill/driver, 1/4 in hex impact driver, two Redlithium™ XC 5.0 extended capacity battery pack, M18™ & M12™ multi-voltage charger, side handle, two belt clip and blow molding carrying case. It is powered by a powerful Powerstate™ brushless motor that delivers power to complete broad range of applications of any hammer drill driver. This 6.9 in drill is compact and allows to easily work in tight spaces with minimum fatigue. The Autostop™ feature prevents over-rotation in a bind-up thereby ensuring added safety and is equipped with a dedicated Autostop™ light on foot of tool to indicate a protection event. Impact driver rotates at a speed rating of up to 3900 RPM. Autostop™ indication light flashes in the event of an Autostop™ shut down. The 3 LED lights surrounding the bit and fastener allows to work with ease in low-light applications. Redlink Plus™ intelligence delivers ultimate trigger control by providing smooth acceleration for small fasteners. Redlithium™ battery packs offer more work per charge.
    Features
            - Powerstate™ brushless motor delivers the power to complete the widest range of applications of any hammer drill driver
- Powerstate™ brushless motor delivers unmatched power for full range of capability to complete the widest variety of applications
- Increase productivity on the jobsite with the fastest driving speed of any impact driver without sacrificing power or control
- Drill is only 6.9 in length for access into tight spaces and reduced fatigue
- Ultimate trigger control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials
- Fastest drilling and driving applications under load
- Autostop™ feature to protect from over-rotation in a bind-up for enhanced safety, equipped with a dedicated Autostop™ light on foot of tool to indicate a protection event
- Impact is only 4.47 in for access in tight spaces
- 4-Mode drive control
Specifications
                | Manufacturer Part Number | 3697-22 | 
|---|---|
| Manufacturer | Milwaukee Tool | 
| Brands | MILWAUKEE | 
| UPC | 045242637744 | 
| Length (in) | 15 | 
| Width (in) | 21 | 
| Height (in) | 6 | 
| Warranty | Tool: 5 year, LED: Limited Lifetime | 
| Package Quantity | 1/Each | 
Reviews
                Write Your Own Review
 
 
     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     
                     Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
                 Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
              Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
                 Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
              Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
                 Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
              Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
                 Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
              Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
                 Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
              BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
                 BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
              BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
                 BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
              DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
                 DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
              Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
                 Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
              Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
                 Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
              
        