HSI® Four Leg Wire Rope Sling, 9/16 in dia, 14 ft L, Bolt Anchor Shackle Ends, 11 ton Capacity
When looking for strength and durability on that next big rigging job, look no further than our array of HSI® Wire Rope Slings. A wide-variety of sizes and styles are available whether working on a small-load lift or preparing to maneuver a massively heavy element. Our slings are there to solve your hoisting, lifting and towing problems.
HSI® slings are assembled in an ISO 9001:2015 registered facility where quality, safety and efficiency are priority. Audits are conducted every year by an independent third-party to ensure manufacturer compliance with the set standards.
Four leg slings are used for both balanced and unbalanced loads. This connection style is recommended for heavier loads where the design calls for more weight distribution as the four connection points offer additional levels of load security. Each eye on these slings is formed using the mechanical flemish eye splice. This process allows for the most efficient use of the rope capacity with top-quality steel as the pull is directly along the centerline of the rope and eye.
Safety Compliance:
- Thimble and Bolt Anchor Shackle: Best for permanent or long-term installations where the load may slide on the shackle pin Bolt-type system stays in place with a nut and cotter pin for secondary securement
- Flemish Eye Spliced Swaging: The sling ends are mechanically formed allowing for larger load capacities. Loops are secured with a forged metal sleeve over the spliced area along with heavy-duty thimbles to protect the ends of the sling
- Double Tagged For Safety: Two tags are used on HSI® slings to identify WLL (Working Load Limit). Riggers can reference critical information for safe sling application and OSHA compliance
- Greater Wear Resistance: A 6 x 25 IWRC (Independent Wire Rope Core) classification for wire rope slings offer large outer wires that provide a balance between fatigue and wear resistance
- American Made Rigging: Hanes Supply, Inc. is proud to be the industry-leading USA based manufacturer of hoisting solutions for industrial construction and building projects since 1930. All slings are manufactured in an ISO 9001:2015 registered facility
| Manufacturer Part Number | 400BAS9/16X-14 |
|---|---|
| Manufacturer | Hanes Supply, Inc |
| Brands | HSI |
| Sling Type | Bridle |
| Safety Factor | 5:1 |
| Sling Legs | Four |
| Length | 14 ft |
| End Fitting | Screw Pin Anchor Shackle |
| Wire Rope Diameter | 9/16 in |
| Component Source | Imported |
| 30° Capacity (ton) | 6.4 |
| 45° Capacity (ton) | 9 |
| 60° Capacity (ton) | 11 |
| Construction Type | 6x25 - EIP IWRC |
| Master Link Nominal Diameter (in) | 1.25 |
| Master Link Inside Length (in) | 9.5 |
| Master Link Inside Width (in) | 5.5 |
| Package Quantity | 1/Each |
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Stanley® 33-716 FatMax® Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Arrow™ HT50 Professional Heavy Duty Tomahawk Hammer Tacker, Flat Crown Staple
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade